Pretty Baby (Awesome Hero Mech) – The Unstoppable Force

We have moved permanently to a new homepage:

mwo-builds.net

All new builds will be posted only on the new site. The new site also features an improved layout and better search features. See you on the new page!

With the Pretty Baby a powerful Awesome variant enters the battlefield. Those of you who can bring the required money to the table will be rewarded with an excellent Assault Mech which can outplay any opponent using its strong armament and the outrageous xl engine 400! This guide was kindly provided by  BertyBargo via the official forums. Be sure to drop by his profile and leave him a thumbs-up (link at the end of the guide).

Pretty Baby (Awesome Hero Mech)

Armor - StandardEndo Steel StructureDouble Heat SinksNo ArtemisView Build Online at mwo.smurfy-net.de

Build Info and Engine

  • Awesome – Pretty Baby (Hero Mech)
  • XL Engine 400
  • Max armor on all parts

Armament

  • 3x SRM6 (4x ammo)
  • 3x Medium Pulse Laser

Playstyle and Hints

  • Your torso twists very fast and very wide. Turn your torso sidewards when charging enemies. Your broad front is an easy target but when moving at high speeds and turning 90 degrees sideways you are almost unhittable. In addition the parts that will be hit this way have more armor and shield your XL engine. It is literally possible to Matrix dodge incoming projectiles.
  • As with all relatively fast Mechs: Try not to be the first on the frontline. It is very tempting to rush headlong into your death. Move at slower speeds at the beginning of the match or even better, try to circle around the enemies.
  • Try to distribute incoming damage. You can easily twist your torso to show more intact parts to your enemy, even your back is a valid option if your center torso is critical upfront.
  • This is an assault Mech but you can very effectively run away with it. You will live longer, can come back and increase your match score greatly by living to die another day.

A similar build can be used without buying the hero variant using a AWS-9M. You can check out the smaller build by clicking here.

Link to original Author

Stalker STK-3F PPC Sniper with Close Range Defenses

We have moved permanently to a new homepage:

mwo-builds.net

All new builds will be posted only on the new site. The new site also features an improved layout and better search features. See you on the new page!

The second guide today will be the infamous Stalker PPC build. There are many iterations of this build. This particular version tries to maintain heavy sniping capabilities without sacrificing close quarter combat capabilities entirely. Anudiz posted this guide in the current search thread. Be sure to drop by his profile and leave him a thumbs-up (link at the end of the guide).

Armor - StandardEndo Steel StructureDouble Heat SinksNo ArtemisView Build Online at mwo.smurfy-net.de

Stalker Ownage by Anudiz

Build Info and Engine

  • Stalker STK-3F
  • Standard Engine 280
  • Reduce armor on head and legs. Max all torso parts.

Armament

  • 2x SRM 4 (3x SRM Ammo)
  • 2x SRM 2
  • 4x PPC

Playstyle and Hints

  • Maintain sniping range as long as possible.
  • Avoid the temptation of heavy brawling. Your SRMs improve your close quarter capabilities a lot but this is a sniper build. Stay out of the action and use SRMs only to finish off damaged opponents.
  • If you notice a damaged component on an enemy. Try to take it out quickly with a precise strike from all four PPCs.
  • Set up a chainfire PPC weapon group. You don´t want to alpha strike every single time.

Link to original Author

Stalker Last Survivor by Anudiz

Cataphract CTF-3D Dual UAC/5 Brawler

We have moved permanently to a new homepage:

mwo-builds.net

All new builds will be posted only on the new site. The new site also features an improved layout and better search features. See you on the new page!

 

I am happy to provide you with a final guide for the regular Cataphract variants. A guy named Wrench from the official forums was kind enough to allow me to use the guide here. Be sure to check out his profile and the original thread in the official forums to drop him a like and thumbs up. Enjoy:

Introductory Lore

 

The Cataphract has been a staple of House Davion Lances since it’s construction. A dependable heavy mech that could be relied upon, and The Gershom, a -3D variant piloted by loyalist Nicholas Reffin was no exception. With a pair of fearsome AC10s, four medium lasers and an experimental XL290 engine, The Gershom was a classic design that saw it’s share of battles and always comported itself well on the field, bringing victory and honour to its pilot .But a mechwarrior is never completely satisfied.
 
While The Gershom was successful, Nicholas was always irritated by its limitations. The mech shouldered the vulnerability of the XL engine, but still moved at a mediocre speed. This sluggishness made close range confrontations unpleasant when the fighting moved in, especially against highly manoeuvrable mechs. This was only compounded by the mech’s inability to quickly dissipate heat. Temperature ratings rested in acceptable tolerances when lobbing shells at range, perhaps with sporadic use of the MLAS. But frequent firing of all four MLAS in a brawl situation had a tendency to build an uncomfortable amount of heat.Still, with limited resources, it was hard to justify any changes on a successful – if imperfect – mech. The Gershom was ran as a powerful, but conventional heavy support unit for some time. But in a changing time of war, more flexibility is desired from a heavy chassis. Flush with an unexpected source of income, Reffin demanded a complete overhaul of some of his older configurations from his engineering team. First among these refits was a project to expand the tactical flexibility of the Gershom.

After much deliberation and several rejected designs, the Gershom was completely striped and rebuilt over a matter of weeks. While unpopular with some, the decision was made to actually reduce the armament on the mech, replacing the dual AC10s with a pair of UAC5s. The argument was made that despite the drop in single shot punch, the rapid firing rate of the combined UAC5s, provided it was properly managed, could bring the total destructive power of the cannons to near parity with the AC10s; and in some use-cases actually exceed them. This fire power could be maintain while projecting a more suppressive effect on the battlefield, laying down a threatening barrage of shells rather than the sporadic hammering of the AC10s. This was though to be more in line with the Gershom’s expanded role as a more active direct fire support unit.

The lighter and more space efficient cannons made way for the upgraded XL320 engine. Capable of moving the large Cataphract at the more impressive speed of 74kph, the engine was further augmented by an additional heatsink over the old design, helping to alleviate what minor heat issues the Gershom had without losing any of the four medium lasers.

However, the most extensive augmentation to the mech’s design was the rebuilding of the internal structural using the new weight efficient Endo-Steel technology and addition of 4 class-III jump jets. While bulky, the new lighter frame brought the mech just in line with the proper tonnage to thrust ratio needed to make the jets worth while.

While the Gershom will never exactly soar over the battlefield, the jump jets give the mech a decent amount of vertical and horizontal movement. This aerial mobility combined with the mech’s higher top speed allow for a much greater range of tactical options. Whether using the jets to reach a high vantage point to fire a storm of UAC5 rounds down on an enemy, to escape an unfavourable engagement, or to short-cut and overtake a fleeing enemy, the jump-jets are a constant surprise to the Gershom’s foes in the field.

The Gershom’s remaining limitations mostly centre around it’s shallow ammunition stores, 100 UAC5 rounds can be used up quickly in an engagement of even moderate length. The XL engine is a constant source of vexation and due concern in the broad chested Cataphract, requiring constant awareness of the mech’s torso condition.

Armor - StandardEndo Steel StructureDouble Heat SinksNo ArtemisView Build Online at mwo.smurfy-net.de

Build Info and Engine

  • Cataphract CTF-3D
  • XL Engine 320
  • Maxed Armor

Armament

  • 2x UltraAC/5 (4x ammo, best placed in legs)
  • 4x Medium Laser
  • 4x Jumpjets

Link to original AuthorLink to original thread

Cataphract CTF-1X Damage Brawler (5xLazers!)

The Cataphract CTF-1x offers 5 energy slots (and one ballistic slot). It will occur to most people to use some mixture of a smaller ballistic weapon (UAC5, AC5, AC10, LB10X) and multiple Large Lasers. However, if you don´t need the range and just want to dish out loads of damage with ease, a Medium Laser centered build usually brings nicer results in regards to the endgame screen. This build provides a successfully tested allround build with an emphasis on high damage dealt utilizing Medium Lasers and a complementary Gauss Rifle as a heat efficient secondary weapon.

CTF-1X Build OverviewCTF-1X Build Overview

Armor - StandardStandard StructureStandard HeatsinksNo ArtemisView Build Online at mwo.smurfy-net.de

Build Info and Engine

  • Cataphract CTF-1X
  • XL Engine 255
  • Max Armor except legs (~39 each) and cockpit (~10)

Armament

  • 5x Medium Laser
  • 1x Gauss Rifle (~4x ammo)
  • 1x Anti-Missile-System (1x ammo)

Playstyle and Hints

  • Despite being a heavy and having a considerable amount of armor: play save, do not lead the charge. Use the increased speed from the engine to outmaneuver your opponents.
  • If you find your Gauss Rifle destroyed a lot before you can use up all the ammo, remove 1-3 ammo and replace them with heat sinks.
  • If you are at high heat levels, do NOT fire your lasers again and overheat. Instead, fire your Gauss Rifle which produces almost no heat.
  • If you overheat and face a strong but slow opponent (Atlas, Stalker, other heavys oder assaults), do the following: override shutdown immediately (hotkey “o”), do not fire, and run for it. Take the fight back to them if you are behind something solid and recovered.

CTF-1X Ownage

 

Link to original Author